Navigation Settings; You Can Control How Travelpilot Behaves During Navigation - Blaupunkt TravelPilot 100 Instructions Manual

Time and Time Zone Settings:
Button
Auto Time Correction
to GPS
Use Auto Time Zone
Set Time Zone
Compare GPS and device
times

4.5.5 Navigation settings

You can control how TravelPilot behaves during navigation. Tap the following buttons:
.
Button
Keep Position on Road
Off-route Recalculation
Restore Lock-to-Position
Use this feature to synchronise the clock of your device to the very
accurate time provided by the GPS receiver.
Use this feature to synchronise the time zone of the clock of your device
to the time zone based on your current GPS position. This is useful if you
travel abroad.
Set time zone manually if you do not want to synchronise the time zone
automatically. This allows you to use Auto Time Correction and apply a
time zone offset to obtain the desired time.
The current time of the GPS receiver and the device clock are displayed.
Please note that the GPS clock is only available with GPS reception. This
allows you to check whether any correction is needed.
This feature allows car drivers to always correct GPS position errors
by matching the vehicle position to the road network. For pedestrian
navigation, this feature is automatically disabled to let the software
show your exact position.
By turning off this feature you also turn off the GPS position error
fi ltering. The position shown on the map will be subject to all position
errors and position fl uctuations.
This switch tells TravelPilot whether to automatically recalculate the
route when you deviate from it. If this feature is turned off, you need
to initiate route recalculation manually otherwise navigation will be
stopped until you return to the originally recommended route.
Setting another point than the current GPS position as the start point of
the active route will automatically disable this feature.
If you have moved or rotated the map during navigation, this feature
moves the map back to your current GPS position and re-enables
automatic map rotation after the given period of inactivity.
4 Reference book (Advanced mode)
Description
Description
, ,
69