Blaupunkt TravelPilot 100 Instructions Manual page 67

You have the following data and functions on this screen:
Name
Route line The upper part of this screen shows your planned
route as a horizontal line. Its leftmost point is
the start of the route, the rightmost one is the
fi nal destination, and you can see your via point
fl ags along the line, spaced in proportion to their
distance.
Estimated Shows the estimated arrival time at the fi nal
Arrival destination of the route based on information
available for the remaining segments of the route.
The calculation cannot take into account traffi c
jams and other possible delays.
Distance Left Shows the distance you need to travel on the route
before reaching your fi nal destination.
Time Left Shows the time needed to reach the fi nal
destination of the route based on information
available for the remaining segments of the route.
The calculation cannot take into account traffi c
jams and other possible delays.
Method This fi eld shows how the route was calculated. It
either displays the Route Calculation Method or
the Vehicle fi eld from the Route Planning options.
If you have chosen Car, Taxi or Bus, the type of the
route (Fast, Short, Easy or Economical) will be
displayed here; if you have selected Emergency,
Bicycle or Pedestrian, this information will be
displayed here.
Warning icons In these square fi elds graphical symbol are
displayed in case warnings are attached to the
planned route. These are warnings, so icons
always show information for the whole route, even
if the data fi elds display values from your current
position to a via point only.
Description
4 Reference book (Advanced mode)
Function
Tap this fi eld to change the
content of all data fi elds to
via point information.
Tap this fi eld to change the
content of all data fi elds to
via point information.
Tap this fi eld to change the
content of all data fi elds to
via point information.
Tap this fi eld to change the
content of all data fi elds to
via point information.
Tap this fi eld to change the
content of all data fi elds to
via point information.
Tap any of the icons for an
explanation.
Opens the Route Planning
options screen from the
Settings menu.
Opens the map screen
designed for route planning.
51