Blaupunkt TravelPilot 100 Instructions Manual page 48

3 Navigating with TravelPilot
• : The map appears with the Cursor in the middle. Modify the location of the Cursor if
necessary, then tap
• : The POI will be searched around the current GPS position.
• : The POI will be searched around the destination of the active route.
• : The POI will be searched not around a given point but by the size of the detour it
means from the active route. This can be useful if you search for a later stopover that causes only
a minimal detour. For example upcoming petrol stations or restaurants.
3. You can narrow the search with the following:
• Select the POI group (e.g. Accomodation), and after that, if needed, select the POI subgroup
(e.g. Hotel or Motel).
• To fi nd the POI by its name, tap
name.
• To list all POIs in a given POI group, tap
4. [optional] When fi nally the list of results appear, you can sort the list:
• : sort the list alphabetically (available when you search around a single location)
• : sort the list by the distance from your current position in a straight line (available
when you search around a single location)
• : sort the list by the distance to drive on route from your current position (available when
you search along the active route)
• : sort the list by the size of the needed detour (available when you search along the active
route)
5. Tap the desired POI in the list.
Additional information will be displayed in a menu (if available).
6. Tap the
7. The map appears with the selected point in the middle. Tap
or
calculated, and you can start navigating.
32
. The POI will be searched around the given location.
button.
(Advanced mode) from the Cursor menu. The route is then automatically
, and use the keyboard to enter a part of the
.
(Simple mode)