Fujitsu Siemens Computers PRIMERGY econel 20 Operating Manual page 54

System expansions
Replacing a hard disk drive
1
Ê
Remove the screws of the hard disk drive you want to replace.
Ê
Take the new hard disk drive out of its packaging.
Ê
Make the required settings (e.g. master/slave, stand alone) on the drives.
Ê
Replace the hard disk drive.
Ê
Fasten the hard disk drive with the screws.
Installing the hard disk carrier
1
Ê Connect the cables to the hard disk drive (1).
Ê
Insert the hard disk carrier in the guide rail provided for this purpose on the casing (2, 3).
Ê
Fasten the hard disk carrier with the screw (4).
46
Installing and removing drives
1
2
3
4
A26361-K831-Z101-1-7619