Measurement Procedures - iHealth HS3 Owner's Manual

MEASUREMENT PROCEDURES

a. Step on the iHealth Wireless Scale, the scale will connect to iOS
device.
b. Launch the "iHealth MyVitals App".
c. Once the Scale detects that there is no more movement, weight
information will display on the Scale display first and then
appear on the App screen.
Taking Measurements Without an iOS Device
After it has been used for the first time, the date and time of the
iHealth Wireless Scale will be synchronized with the iOS device.
The Scale can also be used without being connected to an iOS
device. In this case, the data is stored in the Scale's memory and
can be uploaded to the iOS device when a connection is
re-established.
Offline Memory
The iHealth Wireless Scale can store 200 weight results. When the
scale's memory is full, new measurements will overwrite the oldest
ones.
Automatic Shutdown Feature
The iHealth Wireless Scale shuts down automatically after 2
minutes following measurement completion. If a new measure-
ment is started or the Bluetooth connection is re-established
during this time, the shutdown is delayed by another two minutes.
If abnormal measurement data is present (such as low battery,
above maximum weight, etc.), the Scale will shut down within 3 to
9 seconds.
Operating Instructions
For more detailed operating instructions, please visit
www.ihealthlabs.com or the FAQ section of the "iHealth MyVitals"
app on your iOS device.
4