iHealth Fit HS2S - Smart Body Composition Scale Manual

INTENDED SCALE USE

The iHealth Fit is a precision electronic instrument intended for adult use. The scale utilizes ITO Thin Film Technology and pressure sensors to seamlessly evaluate body composition values. The results are displayed and stored on either your iOS or Android devices in conjunction with the date and time of the reading.

IN THE BOX

1 × iHealth Fit
4 × 1.5V AAA Batteries
1 × Quick Start Guide

SETUP

1. Install the 4 AAA batteries provided into the battery compartment. Be sure to orient them according to the + and – images shown in the battery slots.
   
   If you received your iHealth Fit Scale as a part of a healthcare maintenance program, please consult your physician or provider prior to or during use. Otherwise, follow the necessary steps to download and utilize the iHealth Fit with the iHealth MyVitals app available in the App Store or the Google play.
2. Download the iHealth MyVitals app from the App Store or the Google play. Follow the on-screen instructions to register and set up your iHealth ID.
   
   
   
3. On iHealth MyVitals app, go to "Set Up My Devices", "Select New Device" and choose "Scale" then "Nexus/Fit (HS2S)".
   
4. Please make sure your phone's Bluetooth is enabled and follow the instruction displayed on the app.
   
5. After the connection is established, take a measurement by standing barefoot on the scale. Being barefoot is required for the bio-impedance sensors to be able to take measurement and give your body composition metrics.
   

NOTE
Measurements are taken on lower body and values are extrapolated for entire body.
Your weight is measured by sensors placed in the scale.
Your body fat, lean mass, muscle mass, bone mass, body water, Body Mass Index (BMI), Daily Calorie Intake (DCI) are calculated with the measurement of the impedance of your lower body.
Your visceral fat rating is estimated based on previous values.

TIPS

No wet feet

Don't wear socks

Don't keep your knees together

NOTE

1. Place the iHealth Fit on a hard, flat surface during use. Using the scale on a soft surface like carpet or linoleum may impact the accuracy of measurement.
2. Please ensure that the personal information entered into the iHealth app is correct in order to get the most accurate results.
3. If the iHealth Fit is shared by users with similar weights, make sure that the phone's Bluetooth is enabled and the scale is nearby. If the scale is not connected to the iHealth app, data may not be recorded accurately.
4. The user can set the "Weight-Only" in the iHealth app.
5. If being used as a medical device, please consult your physician for usage guideline.
6. Please consult your physician prior to using the iHealth Fit scale if you are under 18 years of age, over 65 years old, pregnant, or suffering from Osteoporosis, edema, or artificial Dialysis.
7. Regular monitoring of your results is more representative than an isolated value.

LED DISPLAY

	Abnormal electrical impedance measurement.
	The battery is low, please replace with new battery as soon as possible.
	The battery is running out, please replace with new battery.
	Connection error with weight measurement module.
	Weight not in supported range.
	Unstable measurement.
	Flash access error.
	Firmware update error.
	Connection error with app.

SPECIFICATIONS

1. Product name: iHealth Fit
2. Model: HS2S
3. Product Size: 306×306×26.6mm
4. Product weight: 4.08lbs (1.85kg)
5. Classification: internally powered, type BF applied part (four electrodes)
6. Power: 4×1.5V AAA batteries
   Battery life: approx. 3 months with daily usage
7. Display units: Ib/kg
8. Compatibility: Android 5.0+, iOS 9.0+
9. Measurement range:
   Body Weight: 11 lb-400 lb/5 kg-180 kg
   Body Fat: 5.0%-65.0% Scale resolution: 0.1lb/0.1kg 10.
10. Accuracy:
    Body Weight: ±1.1lb / 0.5 kg (11-110lb / 5kg-50kg); ±1% (110-400lb / 50kg-180kg)
    Body Fat: ±1%
11. Operating temperature: 41°F-104°F (5°C - 40°C)
12. Operating humidity: 20 - 85%RH
13. Storage and transport temperature: -4°F-131°F (-20°C - 55°C)
14. Storage and transport humidity: ≤90%RH

Please consult your physician prior to use if you have any of the following*:

1. Medical electronic implants such as pacemakers
2. Artificial heart/lung or other electronic life support systems
3. Portable electronic medical devices such as electrocardiographs.

*The iHealth Fit scale could cause these devices to malfunction, and thereby pose a considerable health risk to users of these devices.

CARE & MAINTENANCE

1. Avoid high temperatures and irradiation.
2. If the scale is stored close to freezing point, allow it to acclimate to room temperature before use.
3. Remove the batteries if the Scale is not going to be used for 3 months or more.
4. Clean the scale with a soft damp cloth. Do not use abrasive or solvent-based cleaners, and never immerse it in water.
5. The scale will maintain its safety and performance features for at least 10 000 measurements or two years of use.

GENERAL SAFETY & PRECAUTIONS

1. Do not stand on the edge of scale, as you may fall over or influence the accuracy of the measurement.
2. Do not use the scale on a tiled or wet floor, as this may result in a fall.
3. Make sure the surface of the Scale is clean and dry before you step onto it, to prevent any slippage.
4. Treat your scale with care. Do not drop it or jump on it. The scale is designed to be stood on; misuse or abuse may break the electronic sensors, cause injury, or result in inaccurate measurements.
5. Avoid using this scale near strong magnetic fields, such as microwave ovens, etc.

USA:

iHealth Labs, Inc.
www.ihealthlabs.com

120 San Lucar Ct., Sunnyvale, CA 94086, USA

+1-855-816-7705
E-mail: support@ihealthlabs.com

Europe:
iHealthLabs Europe SAS
www.ihealthlabs.eu ;
36 Rue de Ponthieu, 75008, Paris, France
Customer service: https://helpcenter.ihealthlabs.eu/hc/en-gb

ANDON HEALTH CO., LTD.

No. 3 Jin Ping Street, Ya An Road, Nankai District, Tianjin 300190, China.
Phone number: +86-22-87611660