Wireless Scale (HS3) OWNER’S MANUAL INDEX IMPORTANT INFORMATION PACKAGE CONTENTS INTENDED USE IMPORTANT NOTE FOR USERS PARTS AND DISPLAY INDICATORS SET UP REQUIREMENTS SET UP PROCEDURES SET UP BLUETOOTH CONNECTION MEASUREMENT PROCEDURES SPECIFICATIONS GENERAL SAFETY AND PRECAUTIONS TROUBLESHOOTING CARE AND MAINTENANCE...
IMPORTANT NOTE FOR USERS Always store the iHealth Wireless Scale in a dry place. To ensure accurate results, keep the Scale away from magnetic fields as these may adversely affect results or possibly damage the Scale.
SET UP REQUIREMENTS The iHealth Wireless Scale is designed to be used with the following iOS models: iPod touch (4th generation) iPod touch (3rd generation) iPhone 4S iPhone 4 iPhone 3GS iPad (3rd generation) iPad2 iPad The iOS version of these devices should be V5.0 or higher.
Select a weight unit by adjusting the switch under the battery cover. SET UP BLUETOOTH CONNECTION STEP 1: Turn on the iHealth Wireless Scale by stepping on it until “0.0”is displayed. STEP 2: Turn the Bluetooth Setting “On” on your mobile device.
MEASUREMENT PROCEDURES a. Step on the iHealth Wireless Scale, the scale will connect to iOS device. b. Launch the "iHealth MyVitals App". c. Once the Scale detects that there is no more movement, weight information will display on the Scale display first and then appear on the App screen.
Page 8
(2) this device must accept any interference received, including interference that may cause undesired operation. 14. Changes or modifications not expressly approved by iHealth Lab Inc. invalidate the user’s warranty for this product. 15. This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION iOS device can not Bluetooth connection Make sure the scale is turned on find the Scale failed and restart iOS device.
The scale displays The communication Pair the iOS device "EE" between the iOS with the scale. device failed. There are fluctuations Every time the scale is a) Place the scale on a hard and flat in the results moved, it must be surface, b) tap on the scale with your recalibrated.
Page 11
Bluetooth ® Bluetooth SIG, Inc. and any use of such marks by iHealth Lab Inc. is permitted under license. “Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been...