Advertisement
Thank you for purchasing the iHealth Wireless Body Analysis Scale. You will now be able to measure, track, and share vital body composition parameters from the comfort of your home.
In addition to body weight, the iHealth Wireless Body Analysis Scale measures:
This manual will guide you through the set up procedures and highlight the Scale's key features. Please keep it handy for future reference.
To learn more about these body composition parameters, refer to the FAQ section of the iHealth App or visit www.ihealthlabs.com.
The iHealth Wireless Body Analysis Scale is a precision electronic instrument intended for adult use. The Scale utilizes full electronic methodology and pressure sensors to non-invasively measure body composition components automatically. The measurements are displayed and stored on an iPod touch, iPhone, or iPad with a date and time stamp.
Pregnant women need to consult their healthcare provider before use. Some physical conditions could affect hydration levels that may lead to inaccurate results. Please consult your healthcare provider for more information.
Always store the iHealth Wireless Body Analysis Scale in a dry place. To ensure accurate results, keep the Scale away from magnetic fields as these may adversely affect results or possibly damage the Scale.
Never use this product in combination with medical electronic devices such as:
This product could cause these devices to malfunction posing a considerable health risk to users of these devices.
The iHealth Wireless Body Analysis Scale is designed to be used with the following iPod touch, iPhone and iPad models:
iPod touch (5th generation)
iPod touch (4th generation)
iPhone 5
iPhone 4S
iPhone 4
iPad mini
iPad (4th generation)
iPad (3rd generation)
iPad 2
The iOS version of these device should be V5.0 or higher.
Prior to first use, download and install "iHealth MyVitals" App from the App Store.
It is very important that every Scale user follows the on-screen instructions to register and complete a personal profile because data points such as height and age are necessary to measure body composition.
Open the battery cover on the back of the Scale and insert four "AA" batteries.
If "Lo" appears on the LED, replace all the batteries.
Rechargeable batteries are not suitable for this Scale.
To avoid damage as a result of battery leakage, remove the batteries if the Scale is not going to be used for 3 months or more.
Avoid getting battery fluid in your eyes. If it gets PUSH in your eyes, immediately rinse with clean water and contact a physician.
The Scale and the batteries must be disposed of according to local regulations at the end of their service life.
Select a weight unit by adjusting the switch under the battery cover.
(Prior to first use, or when changing routers.)
STEP 1: Connect iOS device to your home Wi-Fi. (Settings->Wi-Fi->On)
STEP 2: Turn Bluetooth "On" on your iOS device and it will start searching for the Scale.
STEP 3: Wait until the model name, "iHealth HS5xxxxx", and "Not Paired" appear on your device's Bluetooth screen. Select the model name "iHealth HS5xxxxx" to pair and connect. (Note: it may take up to 30 seconds for your iOS device to detect the Bluetooth signal)
STEP 4: Select "Allow" in the pop-up window, as shown below.
STEP 5: The wireless signal icon on the Scale's display will flash for a few seconds and then stabilize when Wi-Fi connection is successful. The Scale should display as shown below.
The Bluetooth connection will then automatically disconnect from the Scale. Your scale is now connected to your home Wi-Fi and ready to use.
The iHealth App will show detailed body composition data including Weight, BMI, Body Fat, Lean Mass, Body Water Percentage, Muscle Mass, Bone Mass, Visceral Fat Rating and Daily Calorie Intake (DCI).
Note: If the Body Fat measurement fails, only your weight will be displayed.
Taking Measurements Without iOS Device
Up to 20 people can use the Scale. The Scale determines who the user is by matching the new weight with weight previously recorded. If the weight of two or more users is similar, the Scale will display the user number (e.g. User # "x"). Step lightly on the lower left corner to select the appropriate user, and then step lightly on the lower right corner to confirm. When taking measurements without an iOS device, your current measurement data will be uploaded to the Cloud automatically.
If you switch your ISP or internet router, first press the "Set" button under the battery cover on the back of the Scale to reset the Wi-Fi connection, then proceed to the "SET UP THE SCALE'S WI-FI CONNECTION" instruction steps. Visit www.ihealthlabs.com to obtain additional product informa- tion. For Customer Service, please call +1(855) 816-7705.
The Scale can store up to 200 weight results for each user. When each user's memory is full, any new measurements will overwrite the oldest ones.
The Scale shuts down automatically after 2 minutes following completion of the measurement. If a new measurement is started or any App operation is performed during this time, such as uploading the memory contents of the Scale to an iOS device, the shutdown timer will be reset to 2 minutes.
For more detailed operating instructions, please visit www.ihealthlabs.com or the FAQ section of the iHealth App on your iOS device.
PROBLEM | SOLUTION | |
Set Up Problems | Scale model name is not listed on the Bluetooth Menu of the iOS device | Make sure Scale is on "Set" status by pressing the "Set" button on the back of the Scale. |
Bluetooth connection failed |
| |
Wi-Fi sharing pop-up window doesn't show on the iOS device | Re-establish the Bluetooth connection | |
"" Wi-Fi symbol doesn't appear on the Scale display |
| |
App Connection Problems | App and Scale connection failed | Make sure Scale is powered on, and Wi-Fi signal is stable, not flashing. Make sure your iOS device and Scale is connected to the same router. |
Wi-Fi symbol doesn't appear on the Scale display | Make sure Scale is on "Set" status by pressing the "Set" button on the back of the Scale. | |
Wi-Fi symbol turns off after flashing"Er 4" on Scale display | Make sure your router is powered on and router settings such as "password" and "name" have not been changed. | |
Measurement Problems | The Scale does not respond | Remove the batteries from the Scale. Wait 1 minute and re-install the batteries. If problem persists, replace with a new set of batteries. |
The Scale displays "Lo" | Make sure batteries are installed correctly, if the problem persists, replace with a new set of batteries. | |
The Scale displays "Er 0", "Er3","Er6", "Er7", "Er8" | Remove the batteries, wait 1 minute and then replace with a new set of batteries. If problem persists, please contact iHealth Customer Service. | |
The Scale displays "Er 1" | The current weight may be beyond the measurement range of 330 lbs/150 kg. | |
The Scale displays "Er 2" | Place feet in the center of the Scale, stand still, and allow the Scale to shut off completely after weighing. Do not move the Scale unnecessarily. | |
The Scale displays "Er 5" | Make sure Scale is connected to a router. Make sure router is connected to internet. | |
The Scale displays "- - - -" | The Scale failed to detect body impedance. Make sure you step on all four electrodes with bare feet, and try again. |
ANDON HEALTH CO., LTD.
No. 3 Jinping Street, YaAn Road, Nankai District, Tianjin 300190, China. Tel: 86-22-60526161
Manufactured for iHealth Lab Inc.
Mountain View, CA 94043, USA +1-855-816-7705 www.ihealthlabs.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the HS5 that isn't answered in the manual? Leave your question here.