Table of Contents
Advertisement
Set Up & Programming
Transmitter Programming - Feature Bank 1
1.
Turn the ignition ON.
2.
Press and hold the valet/override button.
3.
Within 10 seconds the parking lights will flash (3) three times.
4.
Press 1 button of each transmitter you wish to program.
5.
The system will respond with 1 light flash for each accepted transmitter.
6.
Pressing the override button at anytime during programming will advance to
the next bank.
NOTE: The system will exit transmitter programming after 15 seconds of inactivity.
NOTE: This system has 1 button programming which programs all channels of the
system.
NOTE: The system will hold up to 4 transmitters in memory, programming a 5th
transmitter will erase the oldest transmitter in memory.
NOTE: This system has PTN - Programmed Transmitter Notification. Each time the
ignition is turned ON, the LED will flash the number of transmitters programmed to
the system.
Manual Feature Programming - Feature Bank 2 - 4
1.
Turn the ignition ON.
2.
Press and hold the valet/override button.
3.
Within 10 seconds the parking lights will flash (3) three times.
4.
Use the valet/override button to advance through each option bank. For
feature programming advance to Feature Bank 2, 3 or 4, which is (4) four,
(5) five, and (6) six parking light flashes.
5.
Use the transmitter
feature bank, the parking lights will flash to match the feature number.
6.
Press the BRAKE to change the desired feature. The LED will flash
indicating the changed feature.
NOTE: The system will remain in feature programming mode as long as the
ignition is on, there is no time limit. To exit programming turn the IGNITION OFF.
12
button to scroll through the selections in each
2010 Audiovox Electronics Corporation. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CA 4051 and is the answer not in the manual?
Questions and answers