Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Analytic Systems PWS1000
Summary of Contents for Analytic Systems PWS1000
-
Page 1: Power Supply
INSTALLATION & OPERATION MANUAL PWS1000 Power Supply An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA) www.analyticsystems.com... - Page 2 Copyright (2005-2013) Analytic Systems Ware (1993) Ltd.
-
Page 3: Important & Safety Instructions
Improper connection can result in a risk of an electric shock. Analytic Systems does not recommend the use of the PWS1000 Series Power Supplies in life support applications where failure or malfunction of this product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. -
Page 4: Specifications
The output voltage is easily adjusted 1.0 volts above or below the standard output voltage. The model PWS1000 Power Supply supplies either 12, 24 or 48 VDC from a 110 or 220 VAC power source. High quality digital meters can be added (factory option) to allow monitoring of charging current and charging voltage. -
Page 5: Installation
Fastenings 18-8 Stainless Weight 12 lb / 5.5 kg * Specifications subjects to change without notice. Designed and manufactured by: ANALYTIC SYSTEMS WARE (1993) LTD. 8128 River Way p. 604.946.9981 f. 604.946.9983 Delta, BC V4G 1K5 Canada tf. 800.668.3884 US/Canada www.analyticsystems.com... -
Page 6: Output Connections
110 VAC supply is 14.6 amps, so a 20 amp circuit breaker should be used in the circuit panel and for a 220 VAC supply, 7.3 amps is the maximum current draw, so a 10 amp circuit breaker should be used in the circuit panel to feed power to the PWS1000. OUTPUT CONNECTIONS Two Positive output terminals and two Negative output terminals are provided. - Page 7 Meters High quality digital meters can be added to the charger (factory installed only). Both outputs can be monitored for current and voltage. LOAD SHARE OPTION OUTPUT 1 OUTPUT 1 OUTPUT 2 OUTPUT 2 The units may be configured for load sharing if they are equiped with the optional output isolation diodes.
-
Page 8: Remote Control Option
Remote Control Option IMPORTANT: This remote is to be used only on Power Supplies manufactured by Analytic Systems. A remote control panel may be connected to the converter using a 9-pin D-connector, which attaches to the side of the converter. The remote control panel and D connector are part of the remote control option. -
Page 9: Troubleshooting
Troubleshooting This unit provides LED indicators and a buzzer to help diagnose any problems. The unit should sound the buzzer to alert you prior to shutting itself down. You should immediately check the indicators to determine the cause of the shutdown. LOW OUTPUT Indicates that the output voltage is below normal because: • The current demanded by the devices connected to the unit exceeds the maximum output current rating, causing the output voltage to drop to maintain the current at... -
Page 11: Limited Warranty
2 Years from date of manufacture for non-standard or OEM products 1 Year from date of manufacture for encapsulated products. 3. Analytic Systems will determine eligibility for warranty from the date of purchase shown on the warranty card when returned within 30 days, or... - Page 12 An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA) www.analyticsystems.com...
Need help?
Do you have a question about the PWS1000 and is the answer not in the manual?
Questions and answers