Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Analytic Systems PWS150
Summary of Contents for Analytic Systems PWS150
- Page 1 INSTALLATION & OPERATION MANUAL PWS150 AC-SOURCE POWER SUPPLY An ISO9001 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 101-8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA) www.analyticsystems.com...
- Page 2 Analytic Systems does not recommend the use of any of its products in direct patient care. Examples of devices considered to be life support devices are neonatal oxygen...
-
Page 3: Table Of Contents
• Table of Contents • Introduction • Box Contents • Main Parts • Operation • LED Indicators / Fuse Replacement • Installation • Troubleshooting • Specifications • Warranty Copyright (2005-2019) Analytic Systems Ware (1993) Ltd. Revised - Apr 22, 2021... -
Page 4: Introduction
The box that you’ve received should contain the following: • One PWS150 Power Supply • One IEC320-compatible AC input cable • This manual • One warranty card If there is anything is damaged or missing from your box, please contact your dealer or Analytic Systems for a replacement. -
Page 5: Main Parts
Main Parts Front Panel Integrated Voltmeter Lighted Power Switch Output 1 and Output 2 LEDs Input Power LED Output Voltage Adjust AC Input Connection: Bulgin IEC320 Flange Mount Inlet DC Output Connections: 2 sets 6.3mm Phoenix VDFK4 Terminal Blocks (Red: Positive, Black: Negative) Drip Shield Chassis Drounding Stud... -
Page 6: Operation
Operation The PWS150 is designed for simple and intuitive operation. Before using the power supply, it must be properly installed and connected to the load and power source. See Installation for more details. OPERATING THE UNIT Move the Power Switch to the ON position. - Page 7 LED Indicators The PWS150 features several indicator LEDs on its top panel to display the unit’s operating condition. Their meanings are detailed below. POWER: This LED glows green when the unit is connected to an AC power source and energized.
-
Page 8: Installation
Installation MOUNTING Mount the unit in a WELL VENTILATED and DRY area with at least one inch (2.54 cm) of clear- ance surrounding the unit’s extruded vents. Ideally, the unit should be mounted on a vertical surface with the included drip shield facing upward as shown below. AC INPUT CONNECTION This unit is equipped with a 3-pin Bulgin AC Inlet (6.3mm) Tab Flange Mount to serve as an AC input connection. -
Page 9: Troubleshooting
Troubleshooting In the event of a malfunction, the table below can be used to troubleshoot the issues and figure out the next course of action. Issue Explanation Unit repeatedly turns OFF The unit’s thermal derating may be causing it turn OFF. Fix: Check that the unit’s temperature is within its operating range. -
Page 10: Specifications
Specifications Input Specifications Unit Model PWS150 Voltage 85-265 VAC Current 3A (Max @ 90 VAC in) Power Factor >0.98 at full load (>0.86 @ 400Hz) Input Frequency 45 - 405 Hz Noise on Input < 50 mV Output Specifications Nominal Voltage... - Page 11 2 Years from date of manufacture for non-standard or OEM products 1 Year from date of manufacture for encapsulated products. 3. Analytic Systems will determine eligibility for warranty from the date of purchase shown on the warranty card when returned within 30 days, or...
- Page 12 DESIGNED AND MANUFACTURED BY 800-668-3884 604-946-9983 Support@analyticsystems.com www.analyticsystems.com Battery Chargers • Inverters • Power Supplies • Voltage Converters 101-8128 River Way Delta, B.C. V4G 1K5 | Canada Register Products Online | www.analyticsystems.com/support/warranty-registration...
Need help?
Do you have a question about the PWS150 and is the answer not in the manual?
Questions and answers