Table of Contents
Advertisement
Quick Links
INSTALLATION &
OPERATION MANUAL
PWS610R Rack Mount
AC/DC Power Supply
An ISO9001 and AS9100 Registered Company
Battery Chargers
•
Inverters
•
Power Supplies
•
Voltage Converters
8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA)
www.analyticsystems.com
Advertisement
Table of Contents
Related Manuals for Analytic Systems PWS610R
Summary of Contents for Analytic Systems PWS610R
- Page 1 INSTALLATION & OPERATION MANUAL PWS610R Rack Mount AC/DC Power Supply An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA)
- Page 2 Copyright (2005-2014) Analytic Systems Ware (1993) Ltd.
-
Page 3: Important & Safety Instructions
Improper connection can result in a risk of an electric shock. Analytic Systems does not recommend the use of the PWS610R Series Power Supplies in life support applications where failure or malfunction of this product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. -
Page 4: Specifications
Introduction All new Current Mode switching design offers increased power and reliability in a compact package. Extra input and output filtering reduce EMI to extremely low levels. Reliability features include an input fuse, thermal shutdown, current limiting, reverse battery hookup protection and output short circuit shutdown with automatic recovery. - Page 5 Fastenings 18-8 Stainless Weight 7.2 lb / 3.3 kg * Specifications subjects to change without notice. Designed and manufactured by: ANALYTIC SYSTEMS WARE (1993) LTD. 8128 River Way p. 604.946.9981 f. 604.946.9983 Delta, BC V4G 1K5 Canada tf. 800.668.3884 US/Canada www.analyticsystems.com...
-
Page 6: Installation
For a 220 VAC source, 4 amps is the maximum current draw, so a 5 amp circuit breaker should be used in the circuit panel to feed power to the PWS610R. A ground stud is provided to bond the chassis to local ground to reduce or eliminate EMI. -
Page 7: Operation
resistance between the two positive output terminals. If the diodes are present the terminals will measure as not connected. If the diodes are NOT present, the terminals will measure as a short circuit. Assuming the output isolation diodes are present, connect one 4 foot piece of #14 AWG red wire to each positive output terminal. -
Page 8: Troubleshooting
Meters The unit comes equipped with a digital volt ammeter. The meter shows simultaneous voltage and current on either of the two output terminals. A toggle switch permits selection between the output terminals. The meter features bright red LED readouts to permit easy monitoring from many feet or meters away. - Page 10 Special Services & Options Conformal Coating INCLUDED ON ALL UNITS UNLESS REQUESTED NOT TO as of April 1, 2014 Option “c” Ruggedization Package (EXTRA Conformal Coating and RTV Compound) Option “v” Marine / Industrial Pkg (EXTRA Conformal dipping and RTV Compound) Option “MS”...
-
Page 11: Limited Warranty
2 Years from date of manufacture for non-standard or OEM products 1 Year from date of manufacture for encapsulated products. 3. Analytic Systems will determine eligibility for warranty from the date of purchase shown on the warranty card when returned within 30 days, or... - Page 12 An ISO9001 and AS9100 Registered Company Battery Chargers • Inverters • Power Supplies • Voltage Converters 8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 800.668.3884 (US/CANADA) www.analyticsystems.com...
Need help?
Do you have a question about the PWS610R and is the answer not in the manual?
Questions and answers