Installation & Operation Manual PWS1510MS Power Supply 8128 River Way, Delta B.C. V4G 1K5 Canada T. 604.946.9981 F. 604.946.9983 TF. 1.800.668.3884 (US/CANADA) www.analyticsystems.com...
Page 2
Copyright (2005-2013) Analytic Systems Ware (1993) Ltd.
Page 3
Improper connection can result in a risk of an electric shock. Analytic Systems does not recommend the use of the PWS1510 Series Power Supplies in life support ap- plications where failure or malfunction of this product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness.
Installation ◆ MOUNTING Mount the unit in a DRY location. Allow at least 4 inches of clearance around the extrusion for adequate cooling. ◆ POWER CONNECTION The unit is supplied with a 5 foot power cable. This should normally be adequate to connect to a source of power.
2 Years from date of manufacture for non-standard or OEM products 1 Year from date of manufacture for encapsulated products. Analytic Systems will determine eligibility for warranty from the date of purchase shown on the warranty card when returned within 30 days, or...
Page 7
Only the Warrantor shall perform warranty service. Any attempt to remedy the defect by anyone else shall render this warranty void. There shall be no warranty for defects or damages caused by faulty installation or hook-up, abuse or misuse of the equipment including exposure to excessive heat, salt or fresh water spray, or water immersion except for equipment specifically stated to be waterproof.
Need help?
Do you have a question about the PWS1510MS and is the answer not in the manual?
Questions and answers