Pro-Form 350 User Manual page 13

THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console.
To select the information mode, insert the key into the
console while holding down the Stop button, and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The left display will show the
total number of hours that
the treadmill has been used
and the total number of
miles (or kilometers) that the
walking belt has moved.
An "E" (for English) or an "M"
(for metric) will appear in the
right display. Press the
Speed increase button to
change the unit of measure-
ment, if desired.
IMPORTANT: If a "d" ap-
pears in the right display, the
console is in the "demo"
mode. This mode is intended
to be used only when a
treadmill is displayed in a
store. When the console is in the demo mode, the
power cord can be plugged in, the key can be removed
from the console, and the displays will remain lit; the
buttons will not operate. If a "d" appears when the in-
formation mode is selected, press the Speed de-
crease button until the "d" disappears.
To exit the information mode, remove the key from the
console.
13