Product Information; Specifications; Troubleshooting - Philips AJ3400 User Manual

6 Product
information
Note
•
Product information is subject to change without prior
notice.

Specifications

Amplifier
Total Output Power
Tuner (FM)
Tuning range
Tuning grid
Sensitivity
- Mono, 26 dB S/N Ratio
- Stereo, 46 dB S/N Ratio
Total Harmonic Distortion
Signal to Noise Ratio
General information
AC power (power
adapter)
Operation Power
Consumption
Standby Power
Consumption
Dimensions:
Main Unit (W x H
x D)
Weight: -Main Unit
9 EN
0.4W RMS
87.5-108
MHz
50 KHz
<22 dBf
<49.5 dBf
<2%
>50 dBA
Brand name: Philips;
Model: Model: Y04FE-
050-0500U;
Input: 100-240 V~, 50-
60 Hz; 0.2 A;
Output: 5.0 V 500
mA
1.2 W
<1 W
191 x 103 x 69.5 mm
0.33 kg

7 Troubleshooting

Warning
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
•
Ensure that the AC power plug of the unit
is connected properly.
• Ensure that there is power at the AC
outlet.
No sound
•
Adjust the volume.
No response from the unit
• Disconnect and reconnect the AC power
plug, then turn on the unit again.
Poor radio reception
•
Increase the distance between the unit and
your TV or VCR.
•
Fully extend the FM antenna.
Alarm does not work
• Set the clock/alarm correctly.
Clock/alarm setting erased
•
Power has been interrupted or the power
plug has been disconnected.
•
Reset the clock/alarm.