Choose Your Desired Scan Settings; Start Wand Scanning (Hand-Held) - Avision HF-1116B User Manual

3.3 Choose Your Desired Scan Settings

On the [Scanner Ready] screen, press
1.
Menu mode.
A list of menu options is displayed. The options include
2.
Resolution, Color Mode, Save Format, LCD Off,
and so on.
Press to focus on your desired option such as Save
3.
Format, and then press
Press to focus on your desired item such as PDF,
4.
and then press
Press to exit.
5.
Choices of key Menu options:
Resolution: *300 dpi/600 dpi, Color Mode: *Color/B&W, File Format: *JPEG/PDF, LCD Off:
*45 sec/90 sec/2 min. (*: Default settings)

3.4 Start Wand Scanning (Hand-Held)

1. Place your document on a flat surface.
2. Press to start a scan.
3. Hold the scanner and glide the scanner gently over the
surface of the page as illustrated.
4. Press to stop the scan.
*By default, the Preview mode is on allowing you to view the scanned images for 2 seconds
immediately after scanning (available for JPEG file format only).
Note:
1. Refer to the following list for a proper scan speed (based on an A4-size paper): 0.6
second (B&W, 300 dpi)/1.6 second (Color, 300 dpi)；2.4 seconds (B&W, 600
dpi)/6.5(Color, 600 dpi)
2. If you hold the scanner vertically and scan your
original from right to left or from left to right, your
image will be rotated 90°. Please use the included
software application, NewSoft PageManager or other
image-editing software application to rotate the
scanned image correctly.
to select it.
to select it.
to enter the
3-2