Choose Your Desired Scan Settings; Start Wand Scanning (Hand-Held) - Avision HF-1303S User Manual

3.3 Choose Your Desired Scan Settings

On the [Scan Ready] screen, press
1.
mode.
A list of menu options is displayed. The options include
2.
Resolution, Color Mode, Save Format, LCD Off, and so
on.
Press to focus on your desired option such as Save
3.
Format, and then press
Press to focus on your desired item such as PDF, and
4.
then press to select it.
Press to exit.
5.
* To increase ease of use, please first go to "Menu" and then choose "Language" to select
your desired language on the screen.
* Default settings: Resolution: 300 dpi, Color Mode: Color, File Format: JPEG, LCD Off: 45
sec

3.4 Start Wand Scanning (Hand-Held)

1. Make sure the Wi-Fi connection is turned off.
2. Place your document on a flat surface.
3. Press to start a scan.
4. Hold the scanner and glide the scanner gently over the
surface of the page as illustrated.
5. Press to stop the scan.
*By default, the Preview mode is on allowing you to view the scanned images for 2 seconds
immediately after scanning (available for JPEG file format only).
Note:
1. Refer to the following list for a proper scan speed (based on an A4-size paper): 0.6
second (B&W, 300 dpi)/1.6 second (Color, 300 dpi)；2.4 seconds (B&W, 600 dpi)/6.5
seconds (Color, 600 dpi)/9.8 seconds (Color/B&W, 1200 dpi). * 1200 dpi is only
available for MiWand 2 Wi-Fi!
2. If you hold the scanner vertically and scan your original from
right to left or from left to right, your image will be rotated 90°.
Please use the included software application or other image-
editing software application to rotate the scanned image
correctly.
to enter the Menu
to select it.
3-2