Troubleshooting - Walgreens BA-716W Owner's Manual

Troubleshooting

Error/Symbol What Does It Mean?
Monitor may have been
inflated without the cuff
around the arm OR
Cuff may not be
positioned correctly on
the arm.
You may have moved
while the cuff was
inflating, it is now
attempting to reinflate.
Check the cuff to make
sure it's positioned
correctly.
You may have moved
or spoken during the
measurement process.
You may have been
startled by a noise or
vibration while
measuring.
22
How To Fix It
Read page 16 (Applying
the Cuff).
Read page 14 & 15
(Important Reminders).
Remember that it is
important not to move
and speak as it may
elevate measurements.
Make sure you are in a
quiet and comfortable
place when taking a
measurement.
Troubleshooting
Error/Symbol What Does It Mean?
You have been ignoring
the flashing replace
battery symbol (
The batteries
have run down.
Blood pressure Cuff may not be
value seems too aligned correctly.
high or too low
The monitor keeps Circuitry locked
reinflating
Unable to take a The cuff may not
measurement be positioned
after receiving an
correctly.
error symbol.
How To Fix It
Replace with four new
"AA" batteries. Make
sure the polarities are
).
positioned correctly in the
battery compartment
before continuing to
measure your blood
pressure.
Change them quickly so
you may continue to
measure your blood
pressure without any
interruptions.
Read page 16
(Applying the Cuff).
Remove then reinsert
the batteries and
then proceed to take
measurement again.
Read page 16
(Applying the Cuff).
23