Boot Cycle; Table 3-1 Led Displays Oob Frequencies - Motorola DCT 5100 HD User Manual

3-14 Installation

Boot Cycle

After connecting the proper cabling to the DCT5100, plug the power cord into the DCT5100 and
electrical wall outlet. Begin performing the boot cycle procedure:
The LED displays HUNT and then FR 1.
The DCT5100 begins searching for the headend Out of Band (OOB) frequency carrier. If the
OOB frequency is not set to 75.25 MHz, the LED flashes FR 1 and then flashes FR 2. This
searching process repeats until the correct OOB frequency is found and the required
message for your set-top model is acquired. Table 3-1 illustrates the LED displays and OOB
frequencies:
Table 3-1
LED displays OOB frequencies
Display Frequency
| dl N/A
EF N/A
FP N/A
____ N/A
Hunt N/A
FR 1 75.25 MHz
FR 2 104.20 MHz
FR 3 72.75 MHz
FR 4 92.25 MHz
FR 5 98.25 MHz
FR 6 103.75 MHz
FR 7 107.25 MHz
FR 8 107.40 MHz
FR 9 110.25 MHz
FR 10 116.25 MHz
Au N/A
When the correct OOB frequency is acquired, the LED flashes FR number.
DCT5100 Installation Manual
Description
OOB network download in progress
Erasing Flash memory
Flash memory is being programmed
Network download complete
Hunting for OOB frequency
Attempting to lock on frequency 1
Attempting to lock on frequency 2
Attempting to lock on frequency 3
Attempting to lock on frequency 4
Attempting to lock on frequency 5
Attempting to lock on frequency 6
Attempting to lock on frequency 7
Attempting to lock on frequency 8
Attempting to lock on frequency 9
Attempting to lock on frequency 10
Authenticating code object (displays
only after download)