Panasonic DBS576 User Manual page 82

6. Using Additional Features
To establish a private conversation with a conference
member
1. While in a conference call, press CONF + conference member number.
For example, to have a private conversation with conference member 1, press
CONF + 1.
Note: To reestablish the conference, press CONF.
For parties represented with an FF key (DN/CO key only)
1. Press HOLD. This places all parties on hold (Conference Hold).
2. Press the FF key for the conference member.
Note: To reestablish the conference, press CONF.
To place a conference call on hold
1. Press HOLD. This places all parties on Conference Hold.
Note: Depending on system programming, one of the following occurs:
• Conference members hear a Hold tone, or Music on Hold.
• Conference members can talk to each other (Unsupervised Conference).
Note: To reestablish the conference, press HOLD.
To release a conference member
For 3-party conference calls only
1. Press PROG + conference member number. For example, to release conference
member 2, press PROG + 2.
Note: The conference member numbers are shown on the display.
For conference calls with 3 to 8 parties (members)
1. Press CONF + conference member number.
2. Do one of the following:
• Hang up. Lift the handset or press the ON/OFF key, and then press HOLD to
re-enter the conference call.
• Press the DN key (or CO key) that indicates the Hold status, and then press
CONF to re-enter the conference call.
If you did not select the correct conference member, re-enter the conference by
pressing CONF, and repeat the previous steps with a different member number.
82 DBS 576 issued April 2002 576-51-750