7.0 Spa Fill Up Procedure
FOR BEST RESULTS, READ EACH STEP IN ITS ENTIRETY BEFORE
PROCEEDING WITH THAT STEP.
1.
Prepare The Spa For Filling
•
Clear all debris from the spa. (Although the spa shell has been
polished at the factory, you may want to treat it with a specially for-
mulated spa cleaner. Consult your authorized Jacuzzi dealer for
additional information prior to filling spa.
•
Remove filter cover, then remove filter cartridge as outlined in sec-
tion 11.1 (page 25).
2.
Fill Spa
•
Place the end of your garden hose into the empty filter bucket.
CAUTION: Never fill with water from a water softener. If your
water is extremely "hard", it is preferable to fill half-way with
hard water and the rest of the way with softened water. Or, you
may fill entirely with hard water if you use a special water addi-
tive available from your authorized Jacuzzi dealer.
•
Fill spa until water covers all jets but does not touch the bottom of
the lowest headrest. DO NOT OVERFILL.
page 12
Main TB1 And TB3 Terminal Block Connections
RED
1
BLK
2
Green
All North American Models:
240 VAC, 3-Wire Connection (60Hz)
Figure-C
RED
TB1
RED
BLK
BLK
to Circuit
Board
TB3