Table of Contents
Advertisement
Important Alert Messages
The important alert messages in this manual are as follows:
Task
Maintenance
Important Alert Items
A hazarous situation could result in minor or moderate personal injury if
the user does not perform the procedure correctly. This alert signal also
indicates that damages to the produt or other property, may occur if the
user does not perform the procedure correctly.
1.
Don't install or remove a PCA or connect or disconnect a
cable or connector plug when the drive is powered. This
may give you an electric shock.
2.
Keep away from mechanical assemblies in the unit during
operation. This may cause injuries.
3.
Avoid dangerous detergents when cleaning the disk drive.
1.
Before touching a PCA, perform the human body grounding
to discharge static electricity from your body. This will
prevent electrical damage to the PCA.
2.
Don't install or remove a PCA or connect or disconnect a
cable or connector plug when the drive is powered. This
will prevent electrical damage to the disk drive.
3.
Operating the disk drive with one or more PCA missing will
be unpredictable. Only power the drive with all boards
installed.
4.
Avoid any detergent which may cause short circuits when
cleaning assemblies.
5.
Keep all vents open opened and unblocked. Avoid other
conditions which may cause circuits to overheat.
6.
A ribbon type cable has one line marked. Ensure that this
line is always connected to pin 1 of the cable connector.
The DE is completely sealed. Do not open the DE in the field.
When asking for repair, save all data stored in the disk drive
beforehand. Fujitsu Limited is not responsible for any loss of
data during service and repair.
The disk enclosure must never to opened in the field. Opening
the disk enclosure may cause irreparable damage.
C141-F024-02EN
Alert message
Page
1-1
1-2
1-2
1-3
1-12
vii
Advertisement
Table of Contents
Troubleshooting
