Maintenance & Storage; Riding Attachments; Safety Signs - Exmark Metro HP Operator's Manual

1.5 MAINTENANCE AND STORAGE
1.5.1 For engine maintenance, follow the engine manufacture's
recommendations precisely as stated in the engine manual.
1.5.2 If carburetor adjustment is necessary, stand to one
side and keep feet and hands clear while making adjustments.
1.5.3 Keep engine and engine area free from accumulation of
grass, leaves, excessive grease or oil and other debris
which can accumulate in these areas. These materials can
become combustible and may result in a fire.
1.5.4 Store fuel in a container specifically designed for this
purpose in a cool, dry place.
1.5.5 Keep the mower and fuel container in locked storage to
prevent children from playing or tampering with them.
1.5.6 Gasoline powered equipment or fuel containers should not
be stored in a basement or any enclosed area, where open
pilot lights or heat appliances are present.
1.5.7 Maximum mowing results and safety can only be achieved if
the mower is properly maintained and operated correctly.
1.5.8. Check all bolts frequently to maintain proper tightness.
1.5.9. Keep all guards, shields and all safety devices in place
and in safe working condition.
1.5.10 Frequently check for worn or deteriorating components
that could create a hazard.
1.5.11 All replacement parts must be the same as or equivalent
to the parts supplied as original equipment.
1.6

RIDING ATTACHMENTS

1.6.1 Use only Exmark riding attachments.
Exmark riding attachments may create a hazardous condition
resulting in injury.
1.7

SAFETY SIGNS

1.7.1 Keep all safety signs legible. Remove all grease, dirt
and debris from safety signs.
1.7.2 Safety signs must be replaced if they are missing or
illegible.
1.7.3 When new components are installed, be sure that current
safety signs are affixed to the replaced components.
1.7.4 New safety signs may be obtained from your authorized
Exmark equipment dealer or distributor or from
Exmark Mfg. Co. Inc.
1.7.5 Safety signs may be affixed by peeling off the backing
to expose the adhesive surface. Apply only to a clean,
dry surface. Smooth to remove any air bubbles.
1.7.6 Familiarize yourself with the following safety signs and
instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
The use of other than
- 4 -