Specifications; Model Number; Engine; Fuel System - Exmark Metro HP Operator's Manual

PART NO. 413206
LOCATION: Top of Cutter Deck, Under
Center Belt Shield (36")

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial No.s 150,000 – 189,999
MHP4816BV; MHP5216BV;

2.2 ENGINE

2.2.1 Engine Specifications:
See your Engine Owner's Manual.
2.2.2 3600 RPM (No Load).

2.3 FUEL SYSTEM

2.3.1 Capacity:
2.3.2 Type of Fuel:
87 octane or higher. In countries using the research
method, it should be a 90 octane minimum.
2.3.3 Fuel Filter:
2.3.4 Fuel Shut-Off Valve:

2.4: SAFETY INTERLOCK SYSTEM

Operator must have transmission in neutral and blade clutch
disengaged to start engine. Release of OPC levers will cause
the engine to stop if transmission is not in neutral
and/or blade clutch is engaged.

2.5 STEERING/BRAKE CONTROL:

Fingertip drive control levers provide independent speed
control, braking and neutral to each drive wheel for moving,
stopping and power turning.
locking drive control levers in the "brake" position.

2.6 TRANSMISSION:

2.6.1 Peerless 700-061, five speeds forward and one reverse.
2.6.2 Speed Range:
st
1
nd
2
rd
3
5.0 gal.(18.9 L.)
Regular unleaded gasoline,
Replaceable in-line
2.0 mph (3.22 km/h)
2.7 mph (4.35 km/h)
3.5 mph (5.63 km/h)
PART NO. 413327
LOCATION: Top of Cutter Deck, Under
Belt Shield (48" & 52" Decks)
Serial No.s 150,000 & Higher
MHP3614KA; MHP3615KC;
MHP4814KA; MHP4815KC;
MHP4817KA; MHP5217KA.
1/4 turn
Parking brakes are engaged by
th
4 4.1 mph (6.60 km/h)
th
5 6.2 mph (9.98 km/h)
Rev. 3.1 mph (4.99 km/h)
- 7 -