Maintenance & Storage - Exmark LAZER Z Operator's Manual

Air-cooled models
Hide thumbs Also See for LAZER Z:
Table of Contents

Advertisement

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
1.5 MAINTENANCE AND STORAGE
1.5.1 For engine maintenance, follow the engine manufacturer's recommendations
1.5.2 Disconnect the battery cable from the negative battery post when the unit will be
1.5.3 Allowing batteries to stand for an extended period of time without recharging them
1.5.4 Keep engine, engine area, and pump drive belt compartment free from
1.5.5 Store fuel in a container specifically designed for this purpose in a cool, dry
1.5.6 Keep the mower and fuel container in locked storage to prevent children from
1.5.7 Gasoline powered equipment or fuel containers should not be stored in a
1.5.8 Maximum mowing results and safety can only be achieved if the mower is
1.5.9 Check all bolts frequently to maintain proper tightness.
1.5.10 Keep all guards, shields, and all safety devices in place and in safe working
1.5.11 Frequently check for worn or deteriorating components that could create a
1.5.12 All replacement parts must be the same as or equivalent to the parts supplied as
precisely as stated in the engine manual.
allowed to sit for more than 30 days without use.
will result in reduced performance and service life. To preserve optimum battery
performance and life, recharge batteries in storage when the open circuit voltage
drops to 12.4 volts.
Note: To prevent damage due to freezing, battery should be fully charged
before putting away for winter storage.
accumulation of grass, leaves, excessive grease or oil, and other debris which
can accumulate in these areas. These materials can become combustible and
may result in a fire.
place.
playing or tampering with them.
basement or any enclosed area where open pilot lights or heat appliances are
present.
properly maintained and operated correctly.
condition.
hazard.
original equipment.
www.mymowerparts.com
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents