Closing The Server Blade - Fujitsu PRIMERGY BX620 S5 Operating Manual

Replacing non-hot-plug components
8.2.3

Closing the server blade

Figure 28: Closing the server blade
Ê Place the cover of the server blade on the housing at a distance of 1-2 cm
from the frame, such that the cover lies flush with the edges on both sides.
Ê Push the cover forward in the direction of the arrow (see
engages.
Ê Insert the server blade in the basic unit.
I
To insert the server blade, follow the procedure described in
"Removing the server blade from the basic unit" on page 87
reverse.
Ê Press the On/Off button on the server blade control panel to start up the
server blade again.
92 Betriebsanleitung
CSS components
figure 28) until it
in
BX620 S5