Fujitsu PRIMERGY BX620 S5 Operating Manual page 83

CSS components
Removing and installing the dummy module
Empty bays contain dummy modules which must be removed before installing
a hard disk module:
Figure 19: Removing the dummy module
Ê Press together the two tabs (1) on the dummy module until the locking
mechanism is released, and pull the dummy module out of the bay (A).
V
CAUTION!
Keep the dummy module for future use. If the hard disk module is
removed again and not replaced with a new one, the dummy module
must be reinstalled to comply with EMC regulations, cooling require-
ments and fire protection measures.
I
To reinstall the dummy module later, simply push it into the bay as far as
it will go.
BX620 S5
Replacing hot-plug components
1
2
Betriebsanleitung
1
83