Table of Contents
Advertisement
Quick Links
8588121000
(568234)
Owner's manual
PX-6
Professional monitor system
Thank you very much for purchasing the Fostex PX-6 professional monitor system.
This manual provides the operating instructions for the PX-6. Read this before you use the unit for the
first time. After reading, keep this manual in a convenient place so that you can consult it at any time.
Advertisement
Table of Contents
Related Manuals for Fostex PX-6
Summary of Contents for Fostex PX-6
- Page 1 Thank you very much for purchasing the Fostex PX-6 professional monitor system. This manual provides the operating instructions for the PX-6. Read this before you use the unit for the first time. After reading, keep this manual in a convenient place so that you can consult it at any time.
-
Page 2: Warnings And Precautions
WARNINGS and PRECAUTIONS • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF ATTENTION: Danger d’explosion si les piles sont remplacées de façon PLUG TO WIDE SLOT, FULLY INSERT. incorrect. Remplacer les piles seulement par le même type de pile ou ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES, APAR DE LA l’équivalent. -
Page 3: Table Of Contents
Declaration of EC Directive . . . . . . . . . . . . . . E-12 tion is automatically activated and the volume Fostex distributors list in Europe . . . . . . . . . . E-12 level gradually increases to the previously stored level. -
Page 4: Features And Functions
Features and functions ❷ [INPUT] jack (RCA jack) You can connect an RCA plug to this unbalanced line input jack. <Note>: You cannot use both the RCA and combo [INPUT] jacks simultaneously. When a plug is plugged into the RCA jack, the phone jack is disabled. - Page 5 Features and functions ❻ Mode select switch You can select the control mode: LEVEL or TONE. When the switch is set to LEVEL, you can control the volume level using the [CONTROL] knob. When the switch is set to TONE, you can control the bass and treble using the [CONTROL] knob.
-
Page 6: Volume Level And Tone Controls
Volume level and tone controls You can adjust volume level as well as tone using 1) Set the mode select switch to the LEVEL posi- the [CONTROL] knob. tion. LEVEL The upper status indicator (beside VOLUME) lights steadily. In this condition, you can coarsely adjust the vol- ume level. -
Page 7: Adjusting The Tone Controls
Volume level and tone controls 1) Set the mode select switch to the TONE posi- tion. LEVEL The upper status indicator (beside TREBLE) lights steadily. In this condition, you can adjust the treble set- ting. 2) Adjust the treble by rotating the [CONTROL] VOLUME knob. -
Page 8: Standby Function
When the unit is in the standby mode, the “FOSTEX” logo on the front panel flashes. <Note>: When the mode select switch is set to OFF, the auto standby function is disabled. -
Page 9: Using The Unit With A Subwoofer
Ideally, a subwoofer and the PX-6 should be po- of the subwoofer’s position. sitioned at the same distance from the listening point. - Page 10 Using the unit with a subwoofer When a subwoofer and the PX-6 are not posi- tioned at the same distance from the listening 10 11 point, you need to adjust the phase to compen- Level indicator scale sate. Fig. 3 Fig.
-
Page 11: Subwoofer Settings After Adjusting
Using the unit with a subwoofer Specifications Speaker section Subwoofer settings after adjusting the phase of the high-pass filter Enclosure type: 2 way bass reflex Units: Tweeter: 1-inch soft dome tweeter • Input an 85-Hz sine wave to both the unit and the subwoofer. -
Page 12: Declaration Of Ec Directive
In the electrical fast transient/burst requirements, surge, conducted disturbances by radio-frequency fields, power frequency magnetic field, radiate electromagnetic field requirements and static electricity discharging environment, this could be affected by generation of noise in some cases. FOSTEX DISTRIBUTORS LIST IN EUROPE * Including non-EU countries (as of November 2013) <AUSTRIA>...