Page 1
Thank you very much for purchasing the Fostex PX-5HS active speaker. This manual provides the operating instructions for the PX-5HS. Read this before you use the product for the first time. After reading, keep this manual in a convenient place so that you can consult it at any time.
Volume level and tone controls You can adjust volume level as well as tone using the [CONTROL] knob. VOLUME VOLUME LEVEL LEVEL Adjusting the tone controls Adjusting volume level In the TONE mode, you can adjust the tone con- In the LEVEL mode, you can adjust the volume trols using the [CONTROL] knob.
When the unit is in the standby mode, the “FOSTEX” logo on the front panel flashes. <Memo>: When the mode select switch is set to OFF, the auto standby function is disabled.
Specifications Speaker section Enclosure type: 2 way bass reflex Units: Tweeter: 1-inch soft dome tweeter Woofer: 5.2-inch, Aramid fiber diaphragm Amplifier section General Rated output power Dimensions: 280 (H) x 180 (W) x 210 (D) mm Low: 35 W Weight: 5 kg High: 18 W Power requirement: US : 120 VAC, 60 Hz Inputs...
In the electrical fast transient/burst requirements, surge, conducted disturbances by radio-frequency fields, power frequency magnetic field, radiate electromagnetic field requirements and static electricity discharging environment, this could be affected by generation of noise in some cases. FOSTEX DISTRIBUTORS LIST IN EUROPE Including non-EU countries (as of Jan. 2014) Austria...