Html Examples; External Video; Sequence Mode - Axis 240Q User Manual

AXIS 240Q - Live View Config
21
Default Viewer
Select from the drop-down list the viewer you wish to use for your web browser. Please see
the online help for more information.
Viewer Settings
Show crosshair in PTZ joystick mode - This will enable the display of a crosshair in the
video image when the the PTZ mode is set to joystick.
Use PTZ joystick mode as default - Enabling this sets the PTZ mode to joystick. The mode
can be changed temporarily on the PTZ Control Panel, but will default to joystick if this is
selected.

HTML Examples

You can add live video from your AXIS 240Q to your own web site. The video server can
send Motion-JPEG images to up to 20 simultaneous connections, although an
administrator can restrict this to fewer.
Enter the Image Type, Image size and other settings to suit your web page and click
Update.

External Video

You can add links to other Axis network devices available over the network. These sources
can be displayed on the Live View page, just as if they were video sources connected
directly to the AXIS 240Q.
Click the Add button to open the External Video Source Setup dialog, which is used to
make all the necessary settings.
Example of a path to an external video source:
http://192.168.0.125/axis-cgi/mjpeg/video.cgi

Sequence Mode

The Live View page can be configured to rotate through
selected internal and/or external video sources, in order or
randomly. PTZ preset positions can also be included.
Select the desired video sources and enter the time in seconds to display each source (up to
59 minutes). Click Save.
The Sequence buttons will appear on the Live View page to allow the viewer to start and
stop the sequence mode.
To show the selected video sources in random order, check the box provided.