Know Your Timer - Hotpoint EW74 Instructions For Installation And Use Manual

Know Your Timer

.
GB
A 0 0 0
U
T
O
.
0 0 0
.
0 0 0
.
A
0 0 0
U
T
O
The 'AUTO' symbol will flash at the end of an Auto
Cooking programme to indicate that the programme
has finished.
(When the 'AUTO' symbol is flashing, to return
the oven to Manual operation, turn the oven
controls off, and press the "Manual" button - The
'AUTO' symbol will go out).
8
CLOCKFACE
The timer incorporates a 24 hour
clock.
Ensure the correct time of day is
always set, before using your
cooker.
SYMBOLS
A 'bell' symbol will light up when
you select a Minute Minder
Period and will remain lit for the
period set.
At the end of the Minute Minder
Period, the timer will emit an
audible tone and the 'bell'
symbol will disappear.
The 'cookpot' symbol will light
up either:-
- When the timer is in manual
mode, or
- During the actual Cook Period.
'AUTO' will light up:-
- When the timer is first turned
on it will flash. It will go out when
a time of day is set or when the
timer is set to manual.
TIMER FUNCTION
Minute Minder Button
Here you can set a time period of up to 23 hours 59
minutes, that will count down. When it reaches zero,
the timer will emit an audible tone.
For E ample: If you set 20 minutes, the audible
tone will occur 20 minutes later.
AUTO COOKING PROGRAMME
Cook Period Button
Cook Period is the actual length of time for which,
the timer will switch the oven(s) on as part of an
"Auto Cooking" programme.
(e.g. If you set 2 hours, the food will be cooked for 2
hours).
End Time Button
The time of day at which you want an "Auto Cooking"
programme to end.
For E ample: If you set a "Cook Period" for 2 hours,
and "End Time" of 11:00. The timer will switch the
oven(s) on at 9:00 and turn the oven(s) off at 11:00.
You will hear a audible tone at 11:00, to indicate that
the Auto Cooking Programme has finished.
Notes:
- When setting an Auto Cooking programme you will
need to set the oven control(s) to the required
temperature(s) when you set the timer.
- If an Auto Cooking programme has been set the
oven(s) will only operate during the pre-
programmed time.
Manual Button
Needs to be pressed to cancel an Auto Cooking
programme and return the oven(s) to Manual operation.
and - Buttons
Used to adjust the various timer function settings.
UTTONS