Electronic Timer/Minute Minder - Hotpoint HUE 52G Instructions For Installation And Use Manual

Electronic Timer
/Minute Minder*
Cooking
GB
time setting
Count down
time setting
To set the clock
Note: This may be set while the oven is switched off or
while it is switched on.
1. Press the
and the first two numerical digits on the display
start to flash.
2. Use the "+" and "-" buttons to adjust the hour value.
3. Press the
numerical digits on the display begin to flash.
4. Use the "+" and "-" buttons to adjust the minute
value.
5. Press the
Note: If none of the buttons are pressed, the settings
will be confirmed automatically after 10 seconds have
passed.
Manual Mode
The programmer after the Power up and the Clock time
setting will be in 'Manual Mode' and shall be possible
to engage the other programmer functions using the
selector.
The oven will be driven directly by the user by means
of the knobs present on the control panel.
To set the timer countdown
Note: This function does not interrupt cooking and
does not affect the oven; it is simply used to activate
the buzzer when the set amount of time has elapsed.
1. Press the
and the first two numerical digits on the display
start to flash.
2. Follow steps 2 to 5 "to set the clock" as detailed
above.
The countdown will then be displayed; at the end of
this period of time the buzzer will sound (this may be
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
8
End cooking
time setting
Clock
time setting
Selector
button
button several times until the
button again so that the other two
button again to confirm.
button several times until the
stopped by pressing any of the buttons, or it will stop of
its own accord after one minute).
Programming the duration cooking
Note: A cooking mode must be selected before
programming can take place.
1. Press the
and the first digit on the display flash.
2. Follow steps 2 to 5 "to set the clock" as detailed
above.
• For example: it is 9:00 a.m. and a time of 1 hour
and 15 minutes is programmed. The programme
will stop automatically at 10:15 a.m.
Programming delayed cooking
Note: A cooking duration must be selected before
icon
delayed programming can take place.
1. Follow istruction "programming the duration cooking"
as detailed above.
2. Then press the
the two digits on the display flash.
3. Follow steps 2 to 5 "to set the clock" as detailed
above.
•For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed and the end time is set to
12:30. The programme will start automatically at 11:15
a.m.
Programming has been set when the
icons are illuminated. The TIME display shows the
cooking end time and the cooking duration alternately.
To cancel a previous setting
Press button "-" up until 0 00.
icon
*Available only in certain models
button several times until the
button until the icon and
and
icon