Netsetter - Crown DCi 8 Operation Manual

DriveCore Install Network Display Series Power Amplifiers

NetSetter

Introduction
The Harman HiQnet NetSetter is a software tool which enables you to discover HiQnet devices and reconfigure network settings in real-time for each device. Its function is to
configure a system of devices to interoperate correctly on the same network and resolve conflicts quickly and easily.
NetSetter Window
Figure 8
The top of the NetSetter page list overall operational functions that are available. They are as follows:
• PC Adapter – A drop list menu that selects the Network Interface Card (NIC)'s adapter that NetSetter will use to attempt to discover HiQnet devices. All available
NIC's are listed by IP Address. Selecting a new NIC will force a rescan of the network to which the new NIC is connected.
• Display – This menu filters the device in the grid view by:
- All Devices – Default setting. All discovered devices are displayed.
- HiQnet ID conflicts - Only discovered devices with HiQnet address conflicts are displayed.
- IP address conflicts - Only discovered devices with IP address conflicts are displayed.
- All conflicts - Only discovered devices with either HiQnet address conflicts or IP address conflicts are displayed.
- Locked - Only devices in a Locked configuration.
- Discovering-Only devices in the process of being discovered.
- Discovered - Discovered devices with no conflicts.
- DHCP / Auto IP - All devices which have been discovered with DHCP / Auto-IP enabled and those which have been set to use DHCP / Auto-IP on
applying the edits.
• Rescan Network – Clicking this button re-scans the network to which the currently selected NIC is connected.
• Export – The export button brings up a "Save As" window allowing you to save the HiQnet Addresses and IP Configurations of all devices on the
network to a .CSV (Comma Separated Values) format. This allows you to archive the information and open it in a spreadsheet program such as
Microsoft Excel.
Operation Manual page 11