Troubleshooting - Bissell PowerWash Deluxe User Manual

T
roubleshooting
Reduced spray or no spray.
possible causes
1. Bladder may be empty.
2. The lint screen may be clogged.
3. Tank-in Tank may not be seated properly.
4. Pump may have lost prime.
5. The pump belt may be broken.
16
w w w . b i s s e l l . c o m
Lift Here
Insert Screwdriver
Blade Here
W aRnInG:
to reduce the risk of fire,
electric shock, or injury,
unplug machine from
outlet before servicing.
Remedies
1. Turn switch power off; refill bladder with
clean hand hot tap water.
2. Clean out lint screen.
3. Turn power switch OFF; remove tank and
reseat tank.
4. Turn power switch OFF; after 1 minute turn
ON and depress spray trigger.
Turn power Switch OFF and unplug
machine from the outlet. To check if a pump
belt has broken, you will need a flat head
screwdriver. Insert the blade end into the
lower slot of the belt access door to release
the lower snap. If necessary, insert the
blade end into the upper slot to release the
upper snap. Examine the belt for breakage.
You should be able to see the pump belt
looped around the motor shaft. If
it is broken or missing, please refer to
Replacement Parts on page 19 before calling
BISSELL Consumer Services. Complete
installation instructions will accompany the
replacement belt.