Icom IC-M504 Instruction Manual page 39

e Rotate [DIAL] to select the desired pre-programmed individ-
ual address or "Manual Input," push [DIAL•ENTER].
• The ID code can be set in advance. (p. 17)
• When "Manual Input" is selected, set the 9-digit MMSI
number for the individual you wish to call by rotating [DIAL].
--DSC Menu--
Select Address
Manual Input
John
˘Paul
George
Michael
<CLR ˘ Exit / ENT ˘ OK>
--DSC Menu--
POS Request Ready
<CLR ˘ Exit / ENT ˘ OK>
r Push [DIAL•ENTER] to transmit the position request call.
• If Channel 70 is busy, the transceiver stands by until the chan-
nel becomes clear.
--DSC Menu--
Position Request
Transmitting
t After the position request call has been transmitted, the
following indication is displayed.
--DSC Menu--
Position Request
TX Complete
Now Waiting for ACK
<CLR ˘ Exit>
y Push [CLR] to return to the previous indication before en-
tering the DSC menu.
• Even if [CLR] hasn't been pushed, the display automatically
returns to the previous indication after 2 sec. of inactivity.
6
DSC OPERATION
6
33