Location Requirements; Electrical Requirements - Whirlpool PORTABLE AIR CONDITIONER Use & Care Manual

Hide thumbs Also See for PORTABLE AIR CONDITIONER:
Table of Contents

Advertisement

Available languages

Available languages

NOTES:
The flexible exhaust hose allows placement of the air
conditioner between 19¹⁄₂" and 70⁵⁄₈" (49.5 cm and 180 cm)
from window or door.
Portable air conditioners are designed as supplemental
cooling to local areas within a room.
Vertical Slide Window
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
The portable air conditioner should be connected to a 115 V,
60 Hz, 15-amp fused grounded 3 prong outlet.
The use of a time-delay fuse or time-delay circuit breaker is
recommended.
All wiring must comply with local and national electrical
codes and be installed by a qualified electrician. If you have
any questions, contact a qualified electrician.
4

Location Requirements

5
19¹⁄₂" - 70
/
"
8
(49.5 cm - 180 cm)

Electrical Requirements

Horizontal Slide Window
To ensure proper ventilation, keep the required distance from
the return air outlet to the wall or other obstacles at least
19¹⁄₂" (49.5 cm).
Do not block air outlet.
Provide easy access to grounded 3 prong outlet.
Power Supply Cord
NOTE: Your air conditioner's device may differ from the one
shown.
A. Test button
B. Reset button
This room air conditioner is equipped with a power supply cord
required by UL. This power supply cord contains state-of-the-art
electronics that sense leakage current. If the cord is crushed, the
electronics detect leakage current and power will be
disconnected in a fraction of a second.
19
1
/
" - 70
5
/
"
2
8
(49.5 - 180 cm)
A
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents