Using The Wd Print Share Control Center - Western Digital My Net N900 Central User Manual

Using the WD Print Share Control Center

Opening the WD Print Share Control Center
1. Double click the WD Print Share icon on the desktop or in the system tray to display
the WD Print Share Control Center.
2. Make sure the status is Auto-Connected or Connected. You are now ready to print.
Note: When you exit and log out of WD Print Share, the icon in the system tray
disappears, and you can no longer print using the USB port on router. But
the icon on the desktop is still there, and you can activate it again by
double-clicking it. Just exiting the WD Print Share does not log out the
print server; it still resides in the system tray ready for printing.
Using an Auto-Connected Printer
By default, the printer is in Auto-Connected mode, which allows the computer to be
connected to the printer only when sending a print job to the printer. Another user in the
network can use the printer while you are disconnected.
Using the Connect Button
Connected mode is for both printing and scanning. Selecting the printer or scanner and
clicking Connect manually connects the device to your computer for the timeout duration
set in Tool > Set Timeout in the menu.
Note: Only the connected computer will be able to print until the computer
releases the connection.
MY NET N900 CENTRAL
USER MANUAL
INSTALLING AND USING WD PRINT SHARE
79