Adding A Wi-Fi Device - Western Digital My Net N900 Central User Manual

Adding a Wi-Fi Device

To connect a WPS-enabled wireless device, press the WPS button on the front of the router
or enter a PIN on the device's Wi-Fi connection page. If the device is not capable of WPS,
you can still connect to the router using a network name and password.
1. Click the Add a Wi-Fi Device icon.
2. Select one of the two listed options and follow the appropriate procedure below.
Connecting a WPS-Enabled Device
1. Click the Click here to connect using WPS link to display the screen shown below:
2. Select one of the three WPS methods:
a.
Method 1: Push Button
virtual button on this screen. On your wireless device, press the physical WPS
button or click the virtual WPS button.
b.
Method 2: Device PIN:
c. Method 3: Router PIN: If prompted by your wireless device, enter the WPS PIN
shown on the screen into your wireless device.
MY NET N900 CENTRAL
USER MANUAL
: Press the button on the front of the router or click the
WPS
Enter the wireless device's WPS PIN code.
BASIC SETTINGS AND TASKS
29