Western Digital My Net N900 Central User Manual page 60

Automatic Internet Time
Synchronization
Daylight Saving Dates
Daylight Saving Offset
Enable Daylight Saving
NTP Server Used
Time
Time Zone
Firmware Update Screen
Purpose: Check for router firmware updates and upload new firmware.
For information on performing updates, see "Updating the Router's Firmware" on page 69.
System Screen
Purpose: Save configuration settings on your local hard drive, load configuration settings, restore
factory default settings, and log out.
For information on factory resets and rebooting, see "Restoring the Router to Factory Defaults" on
page 70 and "Rebooting the Router" on page 70.
Logout
Restore Settings from a File
Save settings to a file
Connection Check Screen
Use ping tests to check connectivity between the router and network/Internet
Purpose:
hosts.
Connection Check Result
Host Name or IP Address
MY NET N900 CENTRAL
USER MANUAL
Automatically synchronizes your router's clock with an Internet
time server.
If you select Daylight Saving time, from the drop down lists, select
the month, week, day of the week, and time of the start and end of
Daylight Saving time in your time zone.
If you select Daylight Saving time, from the drop-down list, select
the daylight saving offset. The offset is a formula that combines a
time of day with the time zone and is based on a 24-hour clock.
Click to enable or disable Daylight Saving time.
From the drop-down list, select the name of the NTP server to be
used.
Current date and time at the router's location.
Select the time zone in which the router is located.
Click Logout.
To restore settings from a file, click Choose File and select it. Click
Restore Configuration.
Click Save Configuration. The router's current configuration is
downloaded to your computer.
The result of whether your router can reach the specified host
name or IP address.
Enter the host name or IP address of a computer you want to
locate on the network. Click Ping.
ADVANCED SETTINGS
56