Western Digital My Net N900 Central User Manual page 79

3. Enter the following information for each port forwarding rule you create:
Port Forwarding Rules
Enabled
Application Name
External Port Range
Protocol
IP Address
Computer Name
Internal Port Range
4. Click Save at the top or bottom of the page.
MY NET N900 CENTRAL
USER MANUAL
Select the check box to enable the port forwarding rule. Clear
the check box to disable.
From the drop-down list, select the application whose data you
want to forward to the client on your local network. Click the
double arrows to populate the Name, Internal Port, External
Port and Protocol fields.
Enter the port(s) you want to forward from the WAN interface
(Internet). The port is automatically populated when you pick an
application from the drop-down list.
Select the protocol that you wish to port forward. The options
are All, TCP, and UDP. The protocol will be automatically be
selected if you pick an application from the drop-down list.
Can be manually entered or populated by your selection from
the Computer Name drop-down list.
Device on your local network to which the rule will be applied.
Click the double arrows to populate the IP Address field.
Enter the port(s) on the LAN client to which you want to forward
data. The port is automatically populated when you pick an
application from the drop-down list.
PERFORMING ADVANCED TASKS
75