Wi-Fi Protected Setup (WPS) Screen
Purpose: Add a new wireless device into this network using the WPS push button or PIN;
generate a new PIN or set it to the default value.
Device PIN Code
Enable Router's WPS PIN
Enable WPS
Push Button Method
Router PIN Code
Guest Access Screen
Purpose: Allow visitors access to the 2.4 GHz and 5 GHz wireless bands. For information on
setting up guest access, see "Enabling Guest Access" on page 58.
Advanced LAN Category
MY NET N900 CENTRAL
USER MANUAL
Enter the wireless device's WPS PIN code and click
Start.
Personal identification number for WPS authentication.
Enable the router to establish a secure connection to
other WPS-enabled Wi-Fi devices. Enabled by default.
Click the blue WPS button on the screen to activate
the connection process.
Enter the PIN shown on the screen into the wireless
device's screen. The default PIN is printed on the
bottom of the router.
Optionally, click the appropriate button to generate a
new PIN or reset it to the default value.
ADVANCED SETTINGS
44