Security Settings Category
Firewall Screen
Purpose: Set up a firewall for this router to block specific incoming or outgoing traffic by
IP address and/or ports.
Action
Allow incoming WAN ping
request
Destination
Destination IP Range
IPv4 SPI Firewall
Name
Port Range
Protocol
Source
Source IP Range
MY NET N900 CENTRAL
USER MANUAL
From the drop-down list, select whether to allow or deny
incoming and outgoing traffic.
Select the checkbox to respond to ping requests from the
WAN.
Local network (LAN) or Internet (WAN).
Range of IP addresses where the traffic is destined.
Toggle this button to On to enable the firewall.
Name to identify the firewall rule.
Network traffic port range that will be applied in the firewall
rule.
Protocol that will be applied in the firewall rule. Available
options are TCP, UDP, ICMP, and TCP+UDP.
Local network (LAN) or Internet (WAN).
Range of IP addresses where the traffic initiates.
ADVANCED SETTINGS
48