Preparation; Attach The Tv Stand - Hitachi LE42EC05AUS User Manual

Preparation

Attach the TV Stand

For model LE50EC05AU only
Attached the stand bracket,
1
glass base and the metal
plate as shown.
Carefully place the TV with
2
its front side facing down
on a cushioned flat surface.
For model LE42EC05AUS only
Attached the stand bracket,
1
plastic gasket and the glass
base as shown.
plastic gasket
Carefully place the TV with
2
its front side facing down
on a cushioned flat surface.
6
Attach the stand to the TV
3
as shown.
screws (22mm long)
metal plate
glass base
Tighten the supplied screws
4
to fix the TV stand securely
stand bracket
in place.
Attach the stand to the TV
3
as shown.
stand bracket
glass base
Tighten the supplied screws
4
to fix the TV stand securely
in place.
screws (22mm long)
screws (10mm long)
screws (10mm long)
CAUTION
The TV stand may not be fixed in
place after repeatedly tightening
and loosening the screws.
WARNING
During assembling and
disassembling the TV stand,
please use your hand to support
it. Failure to do so may cause
the TV stand to fall and result in
personal injury.
After installing the TV stand,
please ensure that the screws
are tightened firmly. Failure to
do so may cause the TV set to
tip over or become damaged.