Menu Operation; Picture Menu - Hitachi LE42EC05AUS User Manual

Menu Operation

Picture Menu

Selected Items
Picture Mode
Brightness *
Contrast *
Colour *
Tint *
Sharpness *
Colour Temperature
Picture Size
DNR
(Digital Noise Reduction)
Menu items that are not selectable are grayed out.
The menu items indicated by " * " are only available when "Picture Mode" is set to "Favourite".
The menu items indicated by " ** " are only available when "Colour Temperature" is set to "Favourite".
"Picture Size" is not available in MEDIA mode.
"Colour", "Sharpness" and "DNR" are not available in RGB mode.
20
Dynamic
Natural
Cinema
Favourite
Cool
Normal
Warm
Favourite Red **
Green **
Blue **
Full
4:3
Auto
Panoramic
Cinema
Zoom
Off
Low
Middle
High
Setup Hints
Select the most suitable picture mode according to
your lighting condition.
The default factory setting for "Picture Mode" is
"Dynamic". page 26 to restore all settings to the
default factory settings.
Adjust to brighten or darken the picture.
Adjust to increase or decrease the picture contrast.
Adjust to increase or decrease the colour intensity.
Adjust to obtain natural skin colour.
"Tint" can only be selected and adjusted when
receiving NTSC signal.
Adjust to sharpen or soften the picture.
Select the most suitable settings depending on your
preferred colour tone.
Select the desired picture size.
CAUTION
When displaying the image in "4:3" Picture Size for a
long time, it can cause a permanent after-image on
the TV screen.
In PC mode, only "4:3" and "Full" are available for
"Picture Size".
If Wide Screen Signalling (WSS) is not transmitted
and detected, TV will automatically set Picture Size
as "Full".
Set to reduce noise in the picture due to weak
signal condition.