When the main power of the TV is switched off, the TV cannot be switched on with the remote control.
After a power failure or disconnection of the power plug and the power is resupplied, the power status is changed
to standby mode automatically.
It takes approximately 15 seconds for the picture to appear after the TV is switched on.
The TV will switch to standby mode automatically if there is no signal input for about 10 minutes in TV/AV/HDMI/
The TV will not switch to standby mode automatically if there is no signal input in MEDIA mode.
If the TV will not be used for a long period of time, disconnect the power plug from the wall socket outlet.
When the main power of the TV is switched off, the TV is not completely disconnected from the power supply.
Disconnect the AC power plug from the wall socket outlet to completely shut off the power supply to the TV.
Standby Mode - RED
Power On - BLUE
Remote Control Sensor
Power On/Standby (
Input Select (
Volume Up/Down (
Works as Left/Right cursor on TV menu.
Channel Up/Down (
Works as Up/Down cursor on TV menu.
Main Power Switch
Use it to switch the main
power on or off.