(See Fig. 2, 3.) environment. The SS-3000 installs in minutes; it’s easy to use and simple to 3. With your other hand, grasp the clip, and attach it to the reflector at the adjust.
Page 3
Installation Installation Attaching the Antenna with reflector to the Base Attaching the Reflector to the Antenna 1. Route the 6’ mini coax cable through the base, and screw it securely to 1. Starting from the right side, slide the clip attached to the reflector diagonally into the notch at the back of the antenna.
Operating Your SS-3000 Troubleshooting Locating your SS-3000 Antenna No picture, or the tuner is displaying no “signal.” Your antenna is a precision instrument and should be placed in a location that 1. Make sure the antenna is connected to the correct “Antenna in” input on the is best for receiving TV signals.
Need help?
Do you have a question about the SS-3000 and is the answer not in the manual?
Questions and answers