Wps - TP-Link Archer C2 User Manual

Key type - This option should be chosen according to the AP's security configuration. It

is recommended that the security type is the same as your AP's security type
WEP Index - This option should be chosen if the key type is WEP(ASCII) or WEP(HEX).

It indicates the index of the WEP key.
Authentication Type - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX). It indicates the authorization type of the Root AP.
Encryption - When WPA is set as the Authentication Type, you can select either TKIP

or AES as Encryption.
Password - If the AP your router is going to connect needs password, you need to fill

the password in this blank.
4.6.2

WPS

Choose menu "Wireless 2.4GHz →WPS", you can the screen as shown in Figure 4-16. This
section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi
Protected Setup) function.
WPS - Enable or disable the WPS function here.

Current PIN - The current value of the router's PIN is displayed here. The default PIN of the

router can be found in the label or User Guide.
Restore PIN - Restore the PIN of the router to its default.

Generate New PIN - Click this button, and then you can get a new random value for the

router's PIN. You can ensure the network security by generating a new PIN.
Disable device PIN - If this box is checked, and then wireless clients will not be able to

connect to the wireless network with PIN code.
Add device - You can add a new device to the existing network manually by clicking this

button.
Archer C2 AC750 Wireless Dual Band Gigabit Router
Figure 4-16 WPS
- 38 -