Target - TP-Link Archer C2 User Manual

1. Click Add New button in Figure 4-78 to enter the Add or Modify a Host Entry page.
2. In Mode field, select MAC Address from the drop-down list.
3. In Description field, create a unique description for the host (e.g. Host_1).
4. In MAC Address field, enter 00:11:22:33:44:AA.
5. Click Save to complete the settings.
Then you will go back to the Host Settings page and see the following list.
4.15.3

Target

Choose menu "Access Control → Target", and then you can view and set a Target list in the
screen as shown in Figure 4-81. The target list is necessary for the Access Control Rule.
 Description - Here displays the description about the target and this description is unique.
 Details - The target can be IP address, port, or domain name.
 Edit- To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New button.
2. In Mode field, select IP Address, MAC Address or URL Address.
1） If you select IP Address, the screen shown is Figure 4-82.
Archer C2 AC750 Wireless Dual Band Gigabit Router
Figure 4-81 Target Settings
- 93 -