TP-Link Archer C2 User Manual page 65


Note:
If you check the
find a notice in red as shown in

Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8
to 64 Hexadecimal characters. The default password is the same with the default PIN
code, which is labeled on the bottom of the router or can be found in Figure 4-31.

Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
WPA /WPA2- Enterprise - It's based on Radius Server.


Authentication Type - you can choose the version of the WPA security on the
drop-down list. The default setting is Automatic, which can select WPA (Wi-Fi Protected
Access) or WPA2 (WPA version 2) automatically based on the wireless station's
capability and request.

Encryption - You can select either Automatic, or TKIP or AES.

Note:
If you check the WPA/WPA2-Enterprise
find a notice in red as shown in Figure

Radius Server IP - Enter the IP address of the Radius server.

Radius Server Port - Enter the port number of the Radius server.
Archer C2
WPA/WPA2-Personal
Figure
Figure 4-36 WPA/WPA2 – Personal
Figure 4-37 WPA/WPA2 - Enterprise
AC750 Wireless Dual Band Gigabit Router
radio button and choose TKIP encryption, you will
4-36.
radio button and choose TKIP encryption, you will
4-37.
- 55 -