TP-Link Archer C2 User Manual page 66


Radius Server Password - Enter the password for the Radius server.

Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you check this radio button, you will find a

notice in red as show in Figure 4-38.

Authentication Type - you can choose the type for the WEP security on the drop-down
list. The default setting is Automatic, which can select Shared Key or Open System
authentication type automatically based on the wireless station's capability and request.

WEP Key Format - Hexadecimal and ASCII formats are provided here
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.

WEP Key - Select which of the four keys will be used and enter the matching WEP key
that you create. Make sure these values are identical on all wireless stations in your
network.

Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key
is not promoted) or 5 ASCII characters.
128-bit - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key
is not promoted) or 13 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have
selected Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.
Archer C2 AC750 Wireless Dual Band Gigabit Router
Figure 4-38 WEP
- 56 -
.
Hexadecimal